Titanium alloy TC4ELI/Gr5El: An innovative choice for medical implants
Titanium alloy TC4ELI/Gr5El: An innovative choice for medical implants
In the medical field, the choice of materials is critical to the success of implants. The TC4ELI/Gr5El titanium alloy, with its excellent performance, has become an innovative choice for medical implants.
TC4ELI/Gr5El titanium alloy is further optimized on the basis of TC4/Gr5 alloy, by reducing the content of gap elements C, O, N and impurity elements Fe, so that it can maintain a certain strength at the same time, significantly improve the toughness. This alloy has ex
Perfect combination of lightweight and high performance of titanium alloy fasteners
The perfect combination of lightweight and high performance of titanium alloy fasteners
The application advantages of titanium alloy materials in the field of fasteners are significant, which not only meets the high requirements for material performance in high-end fields such as aerospace, but also provides new possibilities for the lightweight and high performance of fasteners. With the development of China's aerospace industry, the level of connection technology used by new aircraft and space vehicles continues to improve, and new requirements f
The strike could extend delivery times for EU stainless steel
The strike could extend delivery times for EU stainless steel
According to Kallanish on March 20, 2024, the price of cold-rolled stainless steel coils in Europe rose from the previous month. Sources told Kallanish that Italy is worth less than other EU countries due to continued market uncertainty and low downstream activity.
However, sheet prices are rising month-on-month across Europe and in Italy, where sheet stocks are said to be at low to medium levels. Outokumpu and Acerinox are currently idling their plants due to strikes. Ste
Does titanium implant affect magnetic resonance examination
Does titanium implant affect magnetic resonance examination
With the progress of science and technology, people pay more and more attention to oral health. As an advanced dental restoration method, titanium implant has been favored by more and more patients. However, many people are concerned about whether it will affect the results of magnetic resonance imaging when choosing dental implant materials. This article will reveal the relationship between titanium implants and magnetic resonance.
Introduction to titanium implant teeth
Explosive welding of metals
1. Preparation before detonation
(1) Composite plate: explosive composite plate composite plate conventional materials are: titanium base alloy, nickel base alloy, Hastelloy, stainless steel, two-way stainless steel, copper, aluminum and other materials. Specifications are customized according to customer requirements, most cladding plates need to be welded. Welding methods are: argon arc welding, plasma welding, arc welding. The industry usually uses argon arc welding, in the welding process precautions are: argon purity requirements of 99.99 percent, welding current according
Western Superconductor develops forging methods to improve the mechanical properties of titanium alloy bars
Western Superconductor develops forging methods to improve the mechanical properties of titanium alloy bars
Financial news on February 20, 2024, according to the announcement of the State Intellectual Property Office, Western Superconducting Materials Technology Co., Ltd. applied for a forging method called "A forging method to improve the uniformity of mechanical properties of titanium alloy bar ends", public number CN117564199A, the application date is November 2023.
The patent abstract shows that the invention discloses a forging
Method for improving the surface machining quality of titanium alloy
Method for improving the surface machining quality of titanium alloy
First, choose the right cutting tools
The processing difficulty of titanium alloy is largely related to the characteristics of its material, and its low thermal conductivity, high strength and low plasticity will have a certain impact on cutting. Therefore, choosing the right cutting tool is crucial to improve the surface processing quality of titanium alloy. Some tools especially for titanium alloy processing, such as the Angle of the cutti
24 commonly used metal materials
24 commonly used metal materials
1, 45 - high-quality carbon structural steel, is the most commonly used carbon tempered steel
Main features: The most commonly used carbon tempered steel, good comprehensive mechanical properties, low hardenability, easy to crack when water quenching. Tempering treatment should be used for small parts and normalizing treatment should be used for large parts. Application examples: Mainly used in the manufacture of high strength moving parts, such as turbine impeller, compressor
Xiaomi will launch a special titanium alloy edition
Xiaomi will launch a special titanium alloy edition this year
Recently, it was reported that the Mi 14 Ultra will launch a special edition of titanium alloy, and the phone will be equipped with an aluminum frame.
According to the news, the Mi 14 Ultra will be standard with a metal frame, and a special edition of titanium alloy is also being prepared, just like the previous Mi 14 Pro version strategy.
The news also said that the Mi 14 Ultra will be launched in China in three storage versions, 12GB+256GB, 16GB+512GB, 16G
Why can low carbon steel be welded, high carbon steel can not be welded
Why can low carbon steel be welded, high carbon steel can not be welded
According to the chemical composition, steel can be divided into carbon steel and alloy steel two categories. Today, we will talk about whether carbon steel can be welded. According to the chemical composition of steel can be divided into carbon steel and alloy steel two categories.
Carbon steel is divided into:
① Low carbon steel, carbon content less than 0.25%;
② Medium carbon steel, carbon content is 0.25%~0.6%;
Flat target VS rotating target
Flat target VS rotating target
Planar target and rotating target are two common sputtering targets, which have their own characteristics in structure and application.
A planar target is an experimental tool used in the study of substances, usually placed in the target chamber. It is made of pure material and presents a fixed flat form. In material research, planar targets are often used in experiments such as sputtering deposition and ion beam bombardment, through which researchers can obtain relevant information such as the composit
Material and environmental management before welding titanium clad tank
Material and environmental management before welding titanium clad tank
It is reported that in order to ensure the processing quality of titanium composite plate tank, before processing, materials and the environment should be protected and cleaned, the specific management practices are as follows:
1. Materials:
1. Each material, including welding materials, shall meet the requirements specified in drawings and relevant technical standards.
2. Material management:
(1) The surface of the ti
Salt spray testing of stainless steel
Salt spray testing of stainless steel
Corrosion is the destruction or deterioration of a material or its properties under the action of the environment. Most corrosion occurs in the atmospheric environment, which contains corrosive components and corrosion factors such as oxygen, humidity, temperature changes and pollutants.
Salt spray corrosion is one of the most common and destructive atmospheric corrosion. The corrosion of salt spray on the surface of metal materials is caused by the electrochemical reaction between the chloride i
Precision ultra-thin stainless steel belt source manufacturers
Precision ultra-thin stainless steel belt source manufacturers
Ningbo Boss Metal New Material Technology Co., Ltd. is a high-tech enterprise which mainly develops, produces and sells precision stainless steel thin strip.
The company's main products are stainless steel strip, thickness: 0.03mm-1mm, width: 12mm-650mm. Including various grades, various hardness levels, various surface states or have special requirements of ultra-thin, ultra-flat, ultra-hard precision stainless steel belt, with an annual capacity of about 20,000 tons.
The principle and function of restrictor orifice stainless steel plate
The principle and function of restrictor orifice plate
As a throttling element, due to the advantages of simple structure, easy processing, low manufacturing cost, convenient installation, etc., under the premise of meeting the process requirements, the use of restriction-type orifyplate instead of regulating valve to limit flow or reduce pressure will greatly reduce investment and operation and maintenance costs, so it has been widely used in process equipment abroad. It plays an important role in the safe operation of the
The difference between TC4 and TC4ELI of titanium alloy
The difference between TC4 and TC4ELI of titanium alloy
TC4 titanium alloy
TC4 titanium alloy is an α-β titanium alloy successfully developed by the United States in 1954, containing 6% α stable element and 4% β stable element V. The nominal composition of TC4 titanium alloy has an aluminum equivalent of 7.0 and a molybdenum equivalent of 2.9, and the annealing state contains 10%-15% β phase. Al improves the room temperature strength and thermal strength properties of Ti-Al-V alloy by strengthening α phase in solid solution, an
J-20 fighter model unveiled in Shaanxi Hercules to show titanium strength
J-20 fighter model unveiled in Shaanxi Hercules to show titanium strength
On January 16, the reporter saw in a titanium manufacturing enterprise in the high-tech zone that a J-20 model machine had just appeared and attracted many citizens to come to watch the clock.
That morning, at the gate of Shaanxi Hercules Aviation New Material Technology Co., LTD., several workers were assembling a fighter model, about 20 meters long and nearly
Titanium plate stamping process blanking commonly used methods
Titanium plate stamping process blanking commonly used methods
Titanium products must be cut before forming. Titanium plate cutting is also used conventional punching, cutting, milling and sawing methods. Because of the high strength of the titanium plate, it is different from the aluminum alloy.
1. Cutting
Fabricate wool or parts with a straight shape that can be cut on a gantry shears. If you use an ordinary shearing machine, carefully check whether the equipment can cut the titanium plate. Titanium alloy plates with
3D printed titanium golf club heads
3D printing titanium alloy golf club head to achieve innovative breakthroughs
On January 16, the new 3D printed titanium alloy golf club head Designer brand launched by the Japanese Golf Design company opened its global debut in Japan, and will accept reservations in China on January 18. After more than 1600 days of research and development exploration, more than 1000 times of testing, 19 times of performance optimization, the Designer brand adopted the metal 3D printing technology of Hunan Huashu High-tech Co., LTD., successfully broke through the
Properties and characteristics of duplex stainless steel
Properties and characteristics of duplex stainless steel
The relative amount of ferrite and austenite in the rolled or processed product of duplex stainless steel depends on its chemical composition and hot working history. As the phase diagram shows, small changes in composition can have a large effect on the relative volume fraction of the two phases. A single alloying element promotes the formation of ferrite or austenite. The phase equilibrium of ferrite/austenite in metallographical structures can be predicted by multivariate linear regression
CNC milling of rounded corners of thin-walled titanium alloy parts
Quality control of CNC milling for rounded corners of thin-walled titanium alloy parts
Titanium alloy is widely used in the aerospace field because of its high specific strength, good thermal stability, strong corrosion resistance and many other advantages. However, due to the need of weight reduction, titanium alloy parts are mostly designed for thin walls, which brings great problems to machining, especially the quality of rounded CNC milling is difficult to control. The radial cutting depth and the real feed have sudden changes in the process of
Baoji titanium production and processing industry chain
Baoji titanium production and processing industry chain
Baoji titanium production and processing capacity of about 60,000 tons per year, accounting for about 65% of the national production, 33% of the global production, the industrial scale ranks first in the country, the world's second. At present, Baoji City has formed a relatively complete titanium industry chain. Recently, the author walked into Baoji Economic Cooperation Bureau, Baotitanium Group, Shaanxi Topuda Precision Equipment Co., LTD., Baoji High-tech Zone National titanium metal high-e
American enterprises attach importance to titanium patent technology
American enterprises attach importance to titanium patent technology
American companies attach importance to patented titanium technology and reshape the local titanium supply chain in the United States.
IperionX is a leading developer of titanium products from the United States, dedicated to providing high-quality titanium resources and derivatives for advanced industries such as aerospace, aerospace, electric vehicles and 3D printing. The company owns a number of ground-breaking patented titanium production technologies, such as hydr
Stainless steel flash tank
The working principle and function of flash steaming tank
1, The stainless steel made flash tank is the high pressure saturated water into the lower pressure container, due to the sudden reduction of pressure to make these saturated water into saturated water vapor and saturated water under the pressure of the container.
2, the boiling point of the substance is increased with the increase of pressure, and decreased with the decrease of pressure. In this way, the high-pressure and high-temperature fluid can be reduced by reducing its